Recore P is phenolic composite panels and consist of number of layers of foamed fiber composites compressed during high temperature into a laminate. The main components of the foam layer are thermosetting plastic and fiberglass. The material composition gives the panel low weight, high stiffness, dimensional stability, fire resistance, as well as resistance to moisture and chemicals and makes it very easy to process.
High rigidity, dimensional stability, low weight, good thermal insulation, excellent sound insulation and good fire properties, conduct a wi-fi and cellular signal, water resistant. Combines strength, low weight and fire safety in the same material. Recore Industries AB has certifications and product tests: including Railway EN 45545-2: 2015, Marine MED-B, MED-D from Det Norske Veritas (DNV) and ISO 9001:2015.
Partition walls, tables, doors, ventilation and air ducts and any types of finishing elements, incl. floors with HPL & aluminum surface. Recore panels can be covered with different types of materials: metal (aluminum), HPL, nylon flock, fiberglass, veneer etc. for achieving anti scratch resistance, for decorative and for other purposes.
Recore P is phenolic composite panels and consist of number of layers of foamed fiber composites compressed during high temperature into a laminate. The main components of the foam layer are thermosetting plastic and fiberglass. The material composition gives the panel low weight, high stiffness, dimensional stability, fire resistance, as well as resistance to moisture and chemicals and makes it very easy to process.
High rigidity, dimensional stability, low weight, good thermal insulation, excellent sound insulation and good fire properties, conduct a wi-fi and cellular signal, water resistant. Combines strength, low weight and fire safety in the same material. Recore Industries AB has certifications and product tests: including Railway EN 45545-2: 2015, Marine MED-B, MED-D from Det Norske Veritas (DNV) and ISO 9001:2015.
Partition walls, tables, doors, ventilation and air ducts and any types of finishing elements, incl. floors with HPL & aluminum surface. Recore panels can be covered with different types of materials: metal (aluminum), HPL, nylon flock, fiberglass, veneer etc. for achieving anti scratch resistance, for decorative and for other purposes.
Lightweight structures
High fire resistance
Water resistance
High dimensional stability
Conduct Wi-Fi and cellular signals, EMI/RFI
Sound and noise isolation
Low thermal conductivity
Good compression strength
Easy to aplly
Reach, European union regulation for production and use of chemical substances
Lightweight structures
High fire resistance
Water resistance
High dimensional stability
Conduct Wi-Fi and cellular signals, EMI/RFI
Sound and noise isolation
Low thermal conductivity
Good compression strength
Easy to aplly
Reach, European union regulation for production and use of chemical substances
| Dimension | mm | 2440×1220 | ||
| Density | kgm3 | 133 | 160 | 210 |
| Thickness | mm | 18, 20 | 4, 5, 6, 8, 10, 12, 15, 18, 20 | 2, 3, 4, 5, 6, 8, 10, 12, 15, 18, 20 |
Recore Industries AB reservs the right to make necessary product changes at any time. Technical specifications are thus stated subject to change. Information is current for January 2020
| Typical properties | Standard | Unit | P160 | P210 |
| Density | ISO 845 | kgm3 | 160 | 210 |
| Density tolerance +/- 10% | meet | meet | ||
| Compressive strength | DIN51910 | Nmm2 | 0,85 | 4,0 |
| Compressive modulus | ISO 178 | Nmm2 | 70 | 70 |
| Tensile strength | ISO 527 | Nmm2 | 7 | 15 |
| Tensile modulus | ISO 527 | Nmm2 | 300 | 650 |
| Ultimate elongation | ISO 527 | % | 5 | 5 |
| Impact resistance | DIN 53453 | kJm2 | 2 | 4 |
| Flesural modulus | ISO 178 | Nmm2 | 420 | 575 |
| Thermal conductivity | ISO 8301 | Wm1K1 | 0,039 | 0,042 |
| Fire properties | DIN 5510 | R | S4SR2ST2 | S4SR2ST2 |
| EN 45545-2 | R | Meet (thicknesses 6-20) | Meet (thicknesses 6-20) | |
| AFNOR NF 16-101 | R | F0M1 | F0M1 | |
| IMO A653 | M | |||
| IMO A799 | M | |||
| Sound reduction index | ISO 10140-1 | dB | 20-28 | 20-28 |
| Thermal linear expansion | ASTM D696-7 | (-30°C – +60°C) K1 | 20 × 106 | 20 × 106 |
| Water absorption | ISO 62 | % | 5-10 | 3-8 |
| Elongation in length | % | < 0,5 | < 0,5 | |
| Elongation in width | % | < 0,5 | < 0,5 |
Artboard AB reservs the right to make necessary product changes at any time. Technical specifications are thus stated subject to change. Information is current for January 2020
Why Artboard composite panels, especially for air ducts, floors and walls?
Comparison of Artboard air duct vs. Aluminum / Steel air duct
| ArtBoard air ducts and moulded parts | Aluminum air ducts |
| Low thermal conductivity (λ) 0,039 – 0,043 (W/mK) |
High thermal conductivity (λ) 197 – 201 (W/mK) |
| High noise reduction | Low noise reduction |
| Stiff assembled structure (quicker assembly procedure) |
Weak (limp) assembled structure (difficult manipulation during assemblyprocedure) |
| Low thermal expansion coefficient | High thermal expansion coefficient |
| Electrical non coductive | Electrical high conductive |
| Resistant to structural noise | Not resistant to structural noise |
| Easy fabrication (simple tools and procedures) |
Complex fabrication (requires experienced workers) |
| Lower production costs of air ducts | High production costs of air ducts |
| Simple airduct wall – Lower production costs (Artboard panel) |
Multiple layer airduct wall – Higher production costs (aluminum + thermal + acoustic insulation) |
| Low environmental impact | High environmental impact |
| EMI/RFI Transparent | No transparency for EMI/RFI |
Tested on Artboard P210 8 mm samples thickness-whole frequency range on customer request
Several different possibilities can be suitable for shaping Artboard RECORE materials
Artboard panel joint, mounting and fixing
Artboard panels can be covered with different types of materials: metal (aluminum), HPL, nylon flock, fiberglass, veneer etc. for achieving anti scratch resistance, for decorative and for other purposes.
Veneer
Fiberglass fabric
Nylon flock covered by e.g. alcantara
Paper fabrics
Aluminium sheet
Laminated plastic, e.g. melamine
Plastic film, e.g. PVC
HPL
Non-combustible lightweight composite panel
Partition walls, tables, doors, ventilation and air ducts and any types of finishing elements, incl. floors with HPL & aluminum surface. Recore NC is perfect suitable as a core board for sandwich construction.
Lightweight and fire-resistant customized elements for air ducts and interior
We produced individually on request molded parts — prefabricated elements for air ducts and interior parts: wall cladding, air ducts and curved elements of ceilings and corners for railway, marine and automotive industries.
Lightweight and stabile floor for passenger safety and comfort
Recore Light Floor is perfect suitable as a floor for railway, metro and tram cars, automotive solutions (busses, motorhomes, campers, electric vehicles) and for ships and vessels. Recore Light Floor is lightweight, excellent vibration resistance and can be a part of a floor heating system.
Non-combustible lightweight composite panel
Partition walls, tables, doors, ventilation and air ducts and any types of finishing elements, incl. floors with HPL & aluminum surface. Recore NC is perfect suitable as a core board for sandwich construction.
Lightweight and fire-resistant customized elements for air ducts and interior
We produced individually on request molded parts — prefabricated elements for air ducts and interior parts: wall cladding, air ducts and curved elements of ceilings and corners for railway, marine and automotive industries.
Lightweight and stabile floor for passenger safety and comfort
Recore Light Floor is perfect suitable as a floor for railway, metro and tram cars, automotive solutions (busses, motorhomes, campers, electric vehicles) and for ships and vessels. Recore Light Floor is lightweight, excellent vibration resistance and can be a part of a floor heating system.
Recore Industries AB © 1984-2024 All rights reserved
Lightweight fire-resistant composite panels for the marine, railway and automotive industries.
